Ultra Guard Water Based Polyurethane is the ideal protective varnish designed to enhance and safeguard your interior surfaces with exceptional durability and ease of use. Non-yellowing and reinforced with silica for increased resistance to abrasion, ensuring your furniture, worktables, wood floors, and other surfaces look their best for years.
Versatile Application: Suitable for interior water-based paints and all types of bare wood.
Enhances Colour: While applied goes on whitish and dries transparent, enhancing both light and dark colours.
Available in Flat or Satin
HOW TO USE TUTORIAL VIDEO - Click here
Application Instructions:
-
Prepare the Surface:
- Painted Surfaces: Clean and degrease with TSP Alternative. Wait 24-48 hours after painting before applying.
- Bare Wood: Sand smooth with 120-grit sandpaper, ensuring it's free from wax and contaminants. Remove dust before application.
-
Mixing:
- Mix thoroughly with a stick and wait 20 minutes before applying.
-
Application:
- Use a synthetic bristle brush or a microfiber roller. Sand lightly with 220-grit sandpaper between coats.
Number of Coats:
- Painted Surfaces: 2 coats recommended.
- Bare Wood & Non-Sealing Stains: 3 coats for optimal protection.
Drying Times:
- Between Coats: Allow 3 to 48 hours. After 48 hours, lightly sand before the next coat.
- Bare Wood: Apply the second coat after 3 hours without sanding.
- Before Sanding: Wait 6 to 8 hours before sanding for a smooth finish.
Application Tool | Brush or Staalmeester roller |
Location | Interior |
Re-coat Time | 3-48 hours* |
Top Coat | No additional top coat is required.- this is made strong enough for floors and table tops |
Clean Up | Odourless Solvent - can also be used to thin the coats and create a faster drying/cure time. |
Coverage | 6m2 — 65ft2 per can |
Finish/Sheen | Flat or Satin |
Recommended Uses | Virtually any surface with minimal prep required |
Can Be Applied To | It can be applied on interior water-based paints and all types of bare wood. It is suitable for furniture, worktables, wood floors and other interior surfaces. |
Can Be Painted Over | After 10 days curing, with a clean and scuff sand. Test first to ensure adhesion prior to tackling your full project. |
How to Prep | Prior to application all surfaces should be free of wax, varnish or other types of contaminants. Always remove dust after sanding prior to application. |
Cure Time | 7-10 Days |
Maintenance/ Cleaning | Gentle cleaners ( mild soap / warm water ) |
*After 48 hours, a light sanding with 220 grit is necessary before applying another coat.