Fusion Stain & Finishing Oil - Ebony

$30.00

Available Now!

Trusted Site

Fusion Stain & Finishing Oil All in One does just as it says! It add colour, and adds a sealing oil at the same time!

This oil is so easy to use!

The pigment in it stains your wood accentuating the grain.

With a combination of natural oils and resins that penetrate into the wood fibers to create a durable, scratch resistant and waterproof finish. It does not leave a surface film that sits on top, rather it soaks in and becomes part of your wood. It is ideal for wooden table tops as it has excellent resistance to abrasions and can be washed over and over again!

This is a highly concentrated oil blend so a little will go a long way!

This container will cover what 1 Litre of comparable stains do on the market giving you 2 to 3 times more coverage than any water-based stains.

Fusion Stain & Finishing Oil is composed of plant products, Safflower oil, Tung oil, Linseed oil, Vegetable wax, safe odourless mineral solvent and cobalt free siccative which means effective drying without toxic cobalt dryers while being low odour in comparison to traditional solvent based stains.

 

Application Tool Brush, lint free rag, applicator pad
Location  Interior
Re-coat Time  9 hrs
Top Coat No additional top coat is required.- this is made strong enough for floors and table tops. However you may use wax or "Natural" colour Stain & Finishing Oil to increase the sheen but not deepen the colour. 
Clean Up Odourless Solvent 
Coverage  40-75 sq.ft. 
Finish/Sheen Matte to high sheen. Each additional layer and buffing increases the sheen. 
Recommended Uses Reclaimed wood, bare wood, table tops, floors, most any surface, painted finish or Milk Painted pieces. 
Can Be Applied To  Use as a stain over raw or well-sanded wood; apply over painted surface for added sheen, glaze effect, or added protection; seal milk paint or other porous paint. Not recommended over light colours as it will yellow.
Can Be Painted Over Once dried if over bare wood and only 1 coat applied, 10 days after for multiple coats applied . Test to ensure prior to tackling a full project.
How to Prep  Apply over any surface or top coat for desired effect except wax.
Cure Time  7-10 Days
Maintenance/ Cleaning  Light cleaners, as they will strip away the natural oil.